Round Flat Fire Pit Pan and Burner – 12 to 36 inches
$152.99 – $499.49
Round Flat Fire Pit Pan and Burner – 12 to 36 inches
Do I need a burner pan for fire pit?
Fire Pit Burner Pans provide a solid base and support for the burner as well as any potential ignition system. Not only do pans greatly reduce the amount of fire glass you will need by creating a false bottom but they also make maintenance much easier as access to gas hoses and fittings, valve boxes, or any ignition system connections or components.
Round flat pans are designed to be fitted into circular fire pits although in reality they can be fitted into any fire pit!
Size options:
Available in 5 sizes from 12″ diameter up to 36″ diameter, the Stainless Steel Fire Pit Pan is fitted with an appropriately sized Stainless Steel Fire Pit Burner.
Btu’s and Flame height
In the table below you will see a reference to the BTU rating of the burners. To avoid disappointment you need to ensure that your domestic gas supply has sufficient pressure to generate a decent flame in your fire pit. Take a look at this short article to give you the full low down on BTUs and flame height.
If you are looking for a pan & burner combo with a larger burner option, say a 24″ burner, they are sold but only as part of a fully integrated kit. If using natural gas then you will find them in the match lit, spark ignition, and electronic ignition categories. As 24″ Burners have a BTU rating of 297,000 they are not appropriate for use with Small Tank Liquid Propane and due to the inherent dangers of Propane, kits with burners of 24″ and over are only sold for use with Whole House Liquid Propane within the electronic ignition which incorporates the safety features required. You will even find a kit containing a 30″ burner however with a BTU Rating of a whopping 443,000 these are usually only found in commercial settings.
Round Flat Fire Pit Pan and Burner – 12 to 36 inches Specifications:
Made of 100% high-quality 304 stainless steel, the fire pit pan and burner are extremely durable and able to withstand both heat and harsh weather without sustaining damage.
- Whilst the pan and burner can be used with either Natural Gas or Propane, for propane applications, an air mixer is required.
- Weep holes are drilled into the pan in order to prevent water accumulation.
- For use in outdoor vented natural or propane gas burning fire feature ONLY
- 1/2″ bottom gas inlet for easy installation.
- Warranty: Lifetime
Size of Pan + Burner ( inches ) | Flame Sense | Gas Inlet | BTU |
13 Pan + 8 Burner | yes | 1/2 Iinch | 50k |
19 Pan + 12 Burner | yes | 1/2 Iinch | 75k |
25 Pan + 18 Burner | yes | 1/2 Iinch | 110k |
We strongly recommend that all Gas Installations are performed by qualified professionals and that the installation conforms to all Local and State Codes
WARNING: This product can expose you to chemicals including CARBON MONOXIDE, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/