Linear Drop-In Pan with Spark Ignition Kit

Linear Drop-In Pan with Spark Ignition Kit

With this Fire Pit Kit, creating your own fire pit or fire bowl has never been easier. Build your structure then cut or leave a hole about 1″ bigger all round, than the drop-in pan dimensions. Then simply ‘drop-in’ your stainless steel pan. All the pipework can be discreetly hidden from sight for that 100% professional finish.

Manufactured by American Glass in the USA, this drop-in burner and spark ignition kit is delivered with everything you need to create a custom fire pit or fire table.

 

Made from 304 grade stainless steel, the drop-in pan is made to the very highest standards, and  specifically designed for outdoor use. 

Available for both Natural Gas or Propane, the fire pit kit comes complete with all you need and includes the Stainless Steel drop-in pan, the Linear burner, the fire pit connection kit with Key Valve. The Propane version comes with the Air Mixer included, so be sure you order the correct model. And of course you have the Spark Ignition Kit, which is the civilised and safest way you should be lighting your fire pit or fire table.

This Drop-In Linear Pan Kit is available in 4 sizes:

30″ x 6″,  36″ x 6″,  48″ x 6″,  60″ x 6″

Linear Drop-In Pan with Spark Ignition Kit – Cut Out Sizes and Fire Glass Chart.

 

BTU’S AND FLAME HEIGHT

In the table above table you will see a reference to the BTU rating of the burners. This is particularly relevant if you are planing on using your domestic gas supply to fuel your fire pit. To avoid disappointment you need to ensure that your domestic gas supply has sufficient pressure to generate a decent flame on your fire pit. Take a look at this short article to give you the full low down on BTU’s and flame height.

The Gas Connection Kits 

Available in either Natural Gas version or Propane, this gas connection kit provides everything you need for the basic hook up. There is a 2′ length of whistle free gas hose which connects from the underside of your fire pit tray to the Key Valve. On the other side of the key valve is a 5′ section of hose which is connected to your gas supply. The Key valve is supplied together with a Chrome Key Valve Cover Plate, and a chrome Key. The Key Valve turns on or off the gas supply to your fire pit.

If you require a Propane Kit, it comes with a Propane Gas Regulator which connects to the Propane bottle and an air mixer valve which is fitted to the underside of the fire pit tray. All connection instructions are included.

 Specification:

• Manufactured from 304 Grade Stainless Steel for Outdoor Use
• Burners pre-installed at factory
• 4 Sizes Available
• Gas holes drilled not punched for smoother gas flow giving better flame
• Quick & Easy Installation
• Choose from Propane or Natural Gas Connections 
• All connections included
• Push Button Spark Ignition Kit Included
• 5 Year Manufacturers Guarantee
• Free Delivery & Free Returns

A great way to protect your fire pit burner and tray and extend its lifespan, is to keep it covered when not in use. Fabric covers work well but are a little bulky and awkward to use on a regular basis. American Fireglass have manufactured a range of Stainless Steel Covers that are tailer-made to sit neatly over your fire pit pan protecting it from the worst ravages of the weather.

 

 

If you are using an American Fireglass Wind Guard you do not have to remove it to use the fire pit lid as these lids are designed to fit inside the wind guard.

 

 

All that’s remaining is to select your favorite fire glass to finish your fire pit project.

 

Warning: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/