The Outdoor Plus Ready-to-Finish Square Fire Pit 72×72×24
These RtF ( Ready to Finish ) fire pit enclosure allows you to rapidly complete a fire pit project with the freedom to clad the structure with the finish of your choice, matching it perfectly with its surroundings.
A Great Example of a Fire Pit Built Using a Form/Enclosure
The 72 x 72 inches unit is available in two height options, 16 and 24 inches tall. The 16-inch model does not have an access door nor storage for a Propane gas bottle.
The 24-inch tall version has a 14 x 17-inch access door, providing easily accessible storage for a 20 lb Propane bottle within the fire pit structure.
This range of kits is also available in 36, 72, 72, 72, and 84 inches square. For details of these other sizes visit our enclosure listings here.
Specifications:
The Ready to Finish kits are supplied ready for immediate assembly and contain everything you need except the cladding.
- Dimensions- 72 x 72 inches x 16 inches tall ( no access door ) 72 x 72 x 24 inches tall ( with access door )
- Rigid steel framework
- Weather and mold-resisting raw Hardi Board finish.
- The standard model includes Stainless Steel Drop In Pan, Burner, Key Valve, Whistle Free Hoses, and Stainless Steel Air Vent.
- Upgrades: Remote Control systems and Bluetooth options on 110 Volt Electronic Ignition versions
- Door Size: 14″ x 17″ on applicable models
- Nat. Gas and Propane versions
- Five Ignition System options
- 65,000 Btu rating on all Ignition Systems.
- Rapid and simple installation
Ignition Options
The RtF kit includes a drop-in fire pit pan with a burner and all the connections required to hook up to the gas feed. They are available with five ignition options:
Match Lit
The Match Lit system utilizes the chrome key valve installed on the fire pit structure to light the burner.
Turn the key to the on position and light the gas with a long match or kitchen lighter. The flame can be adjusted and turned off using the key valve.
Match Lit Flame Sense (LC Certified)
These systems operate in the same manner as the standard Match Lit systems. However, they also incorporate technology that monitors the flame.
If the flame were to extinguish accidentally, the gas supply would be shut off. This action prevents the build-up of a potentially dangerous gas cloud.
Spark Ignition Flame Sense (LC Certified)
Spark Ignition systems utilize battery power to provide a push-button ignition of the flame via a control panel on the fire pit.
This unit also incorporates Flame Sensing technology, which will automatically turn off the gas supply if the flame accidentally extinguishes.
Electronic Ignition – Plug & Play (CSA Certified)
Suitable for installations where mains power is available, but not recommended for locations close to water (see Low Voltage options). This system continuously monitors flame and operating conditions, automatically relighting if extinguished and shutting down if safety limits are exceeded.
Can be connected to a wall switch, timer, emergency stop, or integrated into a smart home system. Optional remote control upgrade available.
Electronic Ignition – Low Voltage (CSA Certified)
Low-voltage electronic ignition systems (12VAC) are suitable for fire features near water and are commonly used in poolside installations.
This system continuously monitors flame and operating conditions, automatically relighting if extinguished and shutting down if safety limits are exceeded.
These systems can be connected to a wall switch, timer, remote control, pool controller, or smart home system. Remote control upgrades are available.
Related Products
Prop 65 Warning : This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.