...
Free Shipping

The Outdoor Plus OPT-S36 Ready-to-Finish Square Fire Pit Kit 36×36 Inch

The Outdoor Plus
Part #: OPT-S36PB config

$2,156.00$4,726.00

Free Shipping Small Logo
Within 48 Contiguious States

The Outdoor Plus OPT-S36 Ready-to-Finish Square Fire Pit Kit 36×36 Inch

These RtF ( Ready to Finish ) units allow you to quickly construct your fire pit with the freedom to clad the structure with the finish of your choice, matching it perfectly with its surroundings.

 

Fire Built with Enclosure

A Great Example of a Fire Pit Built Using a Form/Enclosure

 

The 36 x 36 inches unit is available in two height options, 16 and 24 inches tall. The 16-inch model does not have an access door nor storage for a Propane gas bottle.

The 24-inch tall version has a 14 x 17-inch access door, providing easily accessible storage for a 20 lb Propane bottle within the fire pit structure.

This range of kits is also available in 36, 48, 60, 72, and 84 inches square. For details of these other sizes visit our enclosure listings here.

 

The Outdoor Plus OPT-S36 Ready-to-Finish Square Fire Pit Kit

Specifications:

The Ready to Finish kits are supplied ready for immediate assembly and contain everything you need except the cladding.

  • Dimensions- 36 x 36 inches x 16 inches tall ( no access door ) 36 x 36 x 24 inches tall ( with access door )
  • Rigid steel framework
  • Weather and mold-resisting raw Hardi Board finish.
  • The standard model includes Stainless Steel Drop In Pan, Burner, Key Valve, Whistle Free Hoses, and Stainless Steel Air Vent.
  • Upgrades: Remote Control systems and Bluetooth options on 110 Volt Electronic Ignition versions
  • Door Size: 14″ x 17″ on applicable models
  • Nat. Gas and Propane versions
  • Five Ignition System options
  • 65,000 Btu rating on all Ignition Systems.
  • Rapid and simple installation

[wpdatatable id=5]

Ignition Options

The RtF kit includes a drop-in fire pit pan with a burner and all the connections required to hook up to the gas feed. They are available with five ignition options:

  1. Match Lit
  2. Match Lit with Flame Sensing ( LC Certified )
  3. Flame Sensing with Spark Ignition
  4. 12 Volt Electronic Ignition ( CSA Certified )
  5. 110 Volt Electronic Ignition ( CSA Certified )

 

Match Lit

To light a Match Lit system, turn on the gas via the key valve installed on the fire pit structure and light the gas with a match, taper, or lighter. The flame is adjusted and turned off using the key valve.

Match Lit with Flame Sensing ( LC Certified )

These systems operate in the same manner as the standard Match Lit systems. However, they incorporate some sophisticated Thermocouple technology that monitors the flame.

If the flame were to extinguish accidentally, the Thermocouple would detect this and automatically turn off the gas supply. This action prevents the build-up of a potentially dangerous gas cloud.

Flame Sensing with Spark Ignition

Spark Ignition systems utilize battery power to provide a push-button ignition of the flame via a control panel on the fire pit.

These units also incorporate Flame Sensing technology to automatically turn off the gas supply if the flame accidentally extinguishes.

12 Volt Electronic Ignition ( CSA Certified )

Low-voltage Electronic Ignition systems should be utilized when the installation is close to water features, such as swimming pools, fountains, etc. Please refer to your Local Codes and Ordinances for specifics.

Electronic Ignition systems incorporate Flame Sensing Technology with the added feature that they will make several attempts to re-light the flame before shutting off the gas supply.

A standard Electronic Ignition system utilizes an on/off switch to light and turns off your fire pit. 

110 Volt Electronic Ignition ( CSA Certified )

Standard Voltage ( 110 Volt ) Electronic Ignition systems can be fitted to fire pits anywhere the power can be installed and are not close to any water features.

These 110 Volt systems also have Flame Sensing and auto re-lighting capabilities and can be upgraded with Remote Control and Bluetooth operation.

 

A Tempered Glass Fire Pit Wind Guard is the perfect accessory to top of your square fire pit. It allows you to safely use your fire pit in breezy conditions, and they look really great too!

 

 

 

 

 

Prop 65 Prop 65 Warning :Prop 65 This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.