HPC Sierra Smooth Copper Fire and Water Bowl by HPC

HPC Fire
Part #: SIER36W-xx config


Free Shipping Small Logo
Within 48 Contiguious States
Product Description
Product Reviews

HPC Sierra Smooth Copper Fire and Water Bowl

This stunning square copper fire and water bowl with its oil-rubbed finish will have a massive visual impact on any backyard or patio design.

This Sierra Fire & Water model is the sister model to the Sierra Fire Bowl.

The Square Bowl is 36″ x 36″ across the top of the bowl tapering down to 18″ x 18″ at its base. It stands 16″ high.

Spacers are provided to raise the bowl a minimum of 3/4″ coupled with a 6″ diameter hole in the bottom to help keep the fire bowl ventilated and the equipment cool.

A door is incorporated into the design allowing access for convenient maintenance and to the match-lit ignition controls.

The Sierra Copper Fire and Water Bowl is ideal for poolside applications with a 1″ FIP fitting for pool pump connection.



Propane or Natural Gas.  Be sure to select the correct gas type as the Natural Gas setup cannot be used with Propane and vice versa.


There is a choice of either the Standard Burner or the Torpedo version. For more information on the difference between the two please see the Torpedo Burner page.



This is by far the simplest way to light a fire pit. Turn on the gas valve within the fire bowl accessed by the door and use a lit taper to light the burner.

Electronic Ignition On/Off

The CSA Certified Electronic Ignition (EI) System, provides the highest degree of safety and control of your gas fire pit.

A Smart Remote is included with this option, allowing the user to set the flame height to High or Low. The Low setting creates a 45% reduction in flame height. The Remote Controller also receives information from the fire pit to advise users of the fire pit status (flashing LED). 

Alternatively, the fire pit can be controlled via a Smart Device Bluetooth App compatible with Apple and Android phones. The free Bluetooth Smart App incorporates a timer, troubleshooting codes, total operational hours, and internal temp monitoring.

A Safety Pilot flame ensures the main burner gas will flow, keeping the fire pit alight. However, if the flame is blown out, the gas supply shuts down preventing a potentially hazardous build-up or pooling of gas.

The system will then automatically commence the Start sequence, relighting your fire pit. All this without any assistance or input from the fire pit user.

The Electronic Ignition HPC Fire Smooth Sierra Copper Fire and Water Bowl is only available in the 12VAC configuration and requires an HBC HPC/SEBCO 12vac 100W Power Supply.


  • 1” FIP fitting for pool pump connection.
  • 12VAC
  • Requires the HPC/SEBCO 12vac, 100W Power Supply


  • 36” x 36” across the top
  • 18” x 18” at the base
  • 16” tall
  • Burner: 12” Penta or Torpedo Penta
  • Pan: 19” Bowl Insert


CSA Certified

HPC Sierra Smooth Copper Fire and Water Bowl Downloads

Sierra Fire & Water Spec Sheet

Electronic Ignition HI/LO Insert Installation & Operations Instructions

Electronic Ignition Drawings

Match Lit Insert Installation & Operation Instructions

Match Lit Drawings

WARNING: California PROP 65: This product can expose you to Lead & Chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.