HPC Sebco 100W Power Supplies for low voltage installations

HPC Sebco 100W Power Supplies for low voltage installations

HPC Sebco 100W Power Supplies for low voltage installations are highly recommended by the manufacturer when installing their low voltage electronic ignition fire features.

A Class II 24 and 12 VAC, 4 amp, 100 W transformer must be used to power the fire pit and be able to be switched on and off from a remote location to allow for easy access or emergency.

For 24 and 12 VAC powered fire pit inserts are the following options:

• 24 VAC (311-PS1, 311-PS3, 311-PS5 Models)

• 12 VAC (313-PS1, 313-PS3, 313-PS5 Models)

The Fire Pit will not perform properly if the power supply rating is below 100W or the wire size is too small.

Wire sizing:

• For wire lengths 75 ft or less: 14 gauge
• For wire lengths 76 ft or more: 12 gauge

Further information:

• Input Primary – 120VAC, 60/50Hz, 1 A Max
• Output Secondary – 24VAC & 12VAC, 60/50Hz, 4 A

• Sebco Wiring diagram Download