HPC Fire Hammered Copper Sedona Gas Fire Pit Bowl

HPC Fire Hammered Copper Sedona Gas Fire Pit Bowl

The beautifully crafted Hammered Copper Square Fire Bowl with its oil-rubbed finish is part of the HPC fire Copper Fire Bowl Series. It is delivered fully assembled and ready to install.

This stunning fire pit is also available within the HPC fire & water range and the Hammered Copper Sedona Fire and Water Bowl is a pretty spectacular water feature!

Options:

Burner Type

18″ Standard Penta Burner or Torpedo Penta Burner

Select your Ignition

There are two Ignition options, Match Lit Ignition or Electronic Ignition.

• The Match Lit Ignition Fire Bowl is lit manually by taper or match.
• The Electronic Ignition model allows your fire pit to be switched On and Off by a wall switch, your whole house system, or by Remote Control (not included) and is only suitable for the 120 VAC models.

Power Option

The Electronic Ignition Option is available in either a 120VAC or 24VAC version. 24VAC is typically used poolside or with other lower voltage requirements.
A Class II 24VAC, 4 amp, 100 W transformer must be used to power the fire pit and be able to be switched on and off from a remote location to allow for easy access or emergency. The Fire Pit will not perform properly if the power supply rating is below 100W or the wire size is too small. HPC highly recommends the HPC SEBCO 24vac Power Supply Transformer available under Accessories and Components.

Select your Gas Type

The kits are available in either Natural Gas or Propane versions.  Please note that the EI Series is not for use with small LP Tanks and must utilize fixed piping for fuel supply.

 

Standard Vs. Torpedo Burner

HPC Fire recently launched the Torpedo Burner range. These Torpedo Burners create a bigger, warmer flame than the equivalent standard burners. HPCs burners have earned a great reputation over the years for providing a great-looking flame. The Penta Burner has developed almost a cult status. Now the Penta, H, and Linear burners are available in the Torpedo version, across the complete range of products.

For more information on the Torpedo Burners check out the SST Torpedo Burners From HPC Fire Page and watch the video at the bottom to be amazed!

 

Specifications:

Dimensions: 40 inches square at the top –  20 inches square at the base – 16 inches tall.

Pan & Burner:  Either an 18″ Standard Penta Burner or Torpedo Penta Burner set in a 25″ diameter Stainless Steel Pan.

BTU Rating:

• The Hammered Copper Sedona Fire Pit Bowl with Electronic Ignition has a BTU Rating of 100,000
• The Hammered Copper Sedona Fire Pit Bowl with Match Lit Ignition has a BTU Rating of 65,000

Fire Glass Quantity: Manufacturers recommended amount is 60 lbs or 30 lbs for Lava Rock.

Access: Access to the Gas Valve is provided via a Magnetic Access Door in the structure of the fire bowl.

Certification: CSA Certified

 

Warranty:

1 Year

 

Download HPC Hammered Copper Sedona Bowl Downloads:

Sedona Copper Fire Bowl Technical Drawings