Hammered Copper Sedona Fire and Water Bowl
$6,398.38 – $9,091.03
Hammered Copper Sedona Fire and Water Bowl
A hand-hammered, oiled, square fire bowl that perfectly celebrates the timeless feel of copper.
This stunning square fire bowl will form the centerpiece of your outdoor entertainment area and create a never to be forgotten impression on your guests. The combination of the planet’s two most powerful elements, fire and water results in a spectacular feature.
The design of the Copper Fire and Water Bowls measures 40″ square at the top, and 20″ square at the base, and stands 16″ tall.
The Sedona design is also available as just a fire bowl – HPC Fire Hammered Copper Sedona Gas Fire Pit Bowl.
The design of the HPC Hammered Copper Sedona Fire and Water Bowl incorporates a door in the bowl’s side allowing access to the ignition system and the gas valve contained within.
The Hammered Copper Oiled Finish
Ignition Options:
There are two ignition options, and both utilize HPC Fires’ unique Penta burner mounted onto a bowl-style pan.
1. Match Lit
The system incorporates a standard 1/2-inch ball valve that turns the gas on and off and allows for flame adjustment.
2. Electronic Ignition
This system enables the user to turn on & off the fire pit via a wall switch, timer switch, or your ‘whole house automation system’ (not included).
While you and your family are enjoying the fire pit, the Electronic Ignition System is continuously monitoring the flames’ status. Should a flame loss occur, the system will turn off the gas flow, and then automatically commence the ‘Start’ sequence to relight the burner.
A low-voltage 12VAC electronic ignition option is now available. This option is exactly what you need when looking for a fire pit for swimming pools.
Standard Penta Burner – There are two power options for this burner:
• 12VAC which requires an HPC/SEBCO 12vac, 100W Power Supply (not included, see below for the listing link)
• 24VAC which requires an HPC/SEBCO 24vac, 100W Power Supply (not included, see below for the listing link )
Torpedo Penta Burner – there is only one option for this burner
• 12VAC which requires an HPC/SEBCO 12vac, 100W Power Supply (not included, see below the listing link )
Click on the link for the HPC Sebco 100W Power Supplies for low voltage installations.
Burner Options:
There are two options available for the copper fire pit bowl, the 18″ Standard Penta or the 18″ Torpedo Penta.
What is a Torpedo Burner?
Torpedo Burners incorporate patented technology that creates a bigger, warmer flame than the equivalent standard burners. HPCs burners have earned a notable reputation over the years for providing a great-looking flame, with the Penta Burner developing almost a cult status. Now the Penta, H, and Linear burners are available in the Torpedo version, across the complete range of products. In fact, it has been so successful that the standard H-Burner and T-Burner are being phased out and models using these will be fitted with the Torpedo version only!
For more information on the Torpedo Burner check out SST Torpedo Burners from HPC Fire
Specifications:
• 40″ x 40″ at the top
• 20″ x 20″ at the base
• 16″ high
• 18″ diameter Penta burner mounted into a 25″ diameter bowl-style pan
• 8″ Water Scupper
• Match-Lit rated at 65,000 BTUs
• Electronic ignition rated at 100,000 BTUs
• CSA Certified
• Available in a Natural Gas or Propane version.
• Suitable for both Commercial and Residential installations.
Water Flow
• Water flow is estimated to be 700~900 GPH.
• It is recommended to put a valve after the pump to trim water flow if desired.
• Consult your pool or pond professional for line and pump sizing.
HPC Fire and Water Bowl Information:
Fire and Water Bowl Installation Instructions
WARNING: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.