The Rectangular Flat Fire Pit Kit with Electronic Ignition by The Outdoor Plus (TOP) is suited for wider fire pit designs where a fuller visual presence is preferred. Within the TOP range, these rectangular configurations utilise H-style burners, which produce parallel runs of flame for a more defined, wider footprint, as well as switchback burners that create a more diffused flame pattern.
The flat pan design is suited to installations where a fully integrated, minimal appearance is required. With no visible lip or edge, the pan is supported below the finished surface of the fire pit, allowing the burner and pan to be concealed once the fire media is in place. This approach requires a dedicated support system within the structure, making it best suited to more considered or custom builds where a clean, uninterrupted finish is the priority.
Configured for electronic ignition, this kit provides consistent, dependable lighting and built-in safety features that monitor flame presence and automatically shut off the gas supply if the flame is lost. A choice of burner configurations, sizes, voltage options, and fuel types allows the system to be tailored to suit different project requirements while maintaining a consistent rectangular flame presentation.
Electronic ignition offers a high level of control and flexibility, from simple wall switches or timers to integration with pool controllers, smart home systems, or optional remote and Wi-Fi controls.
Select Size
Available in 9 lengths, with a choice of 12″ or 18″ pan widths. The selected pan width remains consistent across all lengths, with all models utilising a 6″ wide burner.
Select Gas Type
Available for Natural Gas and Propane. Ensure the correct gas type is selected, as systems are not interchangeable.
Select Ignition
Electronic Ignition – Low Voltage (CSA Certified)
Low-voltage electronic ignition systems are suitable for fire features near water and are commonly used in poolside installations. The system will automatically relight if the flame is extinguished.
These systems can be connected to a wall switch, timer, remote control, pool controller, or smart home system. Remote control upgrades are available.
Electronic Ignition – Plug & play (CSA Certified)
Standard voltage (110V) electronic ignition systems are suitable for installations where mains power is available, but are not intended for use near water.
The system features flame sensing and will automatically attempt to relight if the flame is extinguished.
These systems can be connected to a standard wall switch, timer, emergency stop, or smart home system. Remote control upgrades are available.
Product Specification
The pan is made from aluminum with an H-burner manufactured from .304 Stainless Steel.
The H-burners of the 72″, 84″, and 96″ length pans have an additional crossbar(H) with a gas inlet for proper gas distribution.
As the length of the fire pit pan increases, the burner length and BTU output increase accordingly to maintain consistent flame performance across sizes.
Sizes and BTU Rating – 12″ Pan Widths
-
24″ x 12″ Pan: 18″ x 6″ Burner – 70,000 BTU – 1/2″ Gas Inlet
-
30″ x 12″ Pan: 24″ x 6″ Burner – 90,000 BTU – 1/2″ Gas Inlet
-
36″ x 12″ Pan: 30″ x 6″ Burner – 110,000 BTU – 1/2″ Gas Inlet
-
42″ x 12″ Pan: 36″ x 6″ Burner – 130,000 BTU – 1/2″ Gas Inlet
-
48″ x 12″ Pan: 42″ x 6″ Burner – 150,000 BTU – 1/2″ Gas Inlet
-
60″ x 12″ Pan: 48″ x 6″ Burner – 170,000 BTU – 1/2″ Gas Inlet
-
72″ x 12″ Pan: 60″ x 6″ Burner – 210,000 BTU (Manifold) – 3/4″ Gas Inlets
-
84″ x 12″ Pan: 72″ x 6″ Burner – 250,000 BTU (Manifold) – 3/4″ Gas Inlets
-
96″ x 12″ Pan: 84″ x 6″ Burner – 290,000 BTU (Manifold) – 3/4″ Gas Inlets
Sizes and BTU Rating – 18″ Pan Widths
-
24″ x 18″ Pan: 18″ x 6″ Burner – 70,000 BTU – 1/2″ Gas Inlet
-
30″ x 18″ Pan: 24″ x 6″ Burner – 90,000 BTU – 1/2″ Gas Inlet
-
36″ x 18″ Pan: 30″ x 6″ Burner – 110,000 BTU – 1/2″ Gas Inlet
-
42″ x 18″ Pan: 36″ x 6″ Burner – 130,000 BTU – 1/2″ Gas Inlet
-
48″ x 18″ Pan: 42″ x 6″ Burner – 150,000 BTU – 1/2″ Gas Inlet
-
60″ x 18″ Pan: 48″ x 6″ Burner – 170,000 BTU – 1/2″ Gas Inlet
-
72″ x 18″ Pan: 60″ x 6″ Burner – 210,000 BTU (Manifold) – 3/4″ Gas Inlets
-
84″ x 18″ Pan: 72″ x 6″ Burner – 250,000 BTU (Manifold) – 3/4″ Gas Inlets
-
96″ x 18″ Pan: 84″ x 6″ Burner – 290,000 BTU (Manifold) – 3/4″ Gas Inlets
TOP Electronic Ignition Components
Installation Considerations
For outdoor use only.
Electronic ignition systems require a minimum of 10″ clearance below the pan. With a manifold, this increases to 15″.
A gas shut-off valve must be installed externally for emergency and maintenance access. A gas key valve is recommended to allow manual flame control.
Proper ventilation of the fire pit enclosure is essential for cooling and venting residual gas. A minimum of two vents on opposing sides is required, each with at least 18 sq. inches of free air space.
Adequate drainage must be provided to prevent water accumulation within the enclosure.
Warranty
Product Documents
- PDF – Low Voltage Ignition System Manual
- PDF – Plug & Play Ignition System Manual
- PDF – TOP Rectangular Bullet Burner Drop-In Kits Spec Sheet
- PDF – 12″ Wide Pan – 12V Electronic Ignition Spec Sheet
- PDF – 12″ Wide Pan – 110V Electronic Ignition – Spec Sheet
- PDF – 18″ Wide Pan – 12V Electronic Ignition Spec Sheet
- PDF – 18″ Wide Pan – 110V Electronic Ignition – Spec Sheet