The Aluminum Fire Bowls by HPC Fire are designed as a complete, ready-to-install appliance, bringing together a clean, modern look with a lightweight build that is easy to position and install. A durable powder-coated finish, available in concrete or walnut tones, gives each bowl a considered, well-finished appearance.
Spun Aluminum Fire Bowl
Each bowl is spun from 5052 aluminum, creating a strong, consistent form that performs well in outdoor environments while remaining easy to handle. The design is well considered, with integrated ventilation that helps keep internal components cooler while also reducing heat transfer to the outer shell.
A removable burner pan allows for straightforward maintenance, and a pre-cut access point simplifies gas line installation.
- Ventilation: Integrated cooling system for internal components and outer shell
- Burner Pan: Removable for maintenance access
- Weight: Lightweight design for easier handling and placement
Options
Select Color
Two finishes: Concrete and Walnut.
Select Gas Type
Natural Gas or Propane. Electronic Ignition models are not designed for use with small LP tanks and must be connected to a fixed, permanent gas supply.
Select Burner
Choose between the Standard Burner and the Torpedo Burner. Please refer to the Torpedo Burner page for a detailed comparison.
Select Ignition
Match-Lit
A simple and reliable lighting method. Open the gas key valve located on the side of the bowl and use a lit taper to ignite the burner. The key valve can also be used to adjust flame height.
Electronic Ignition On/Off
The CSA Certified Electronic Ignition system provides added safety and control. Operate the fire feature using a wall switch, timer switch, remote control, or compatible smart home system.
The system continuously monitors the flame. If the flame is lost, gas flow is shut off, and the system automatically attempts to relight.
A dedicated gas shutoff is required for servicing and emergency access and should not be used to adjust flame height.
Available in 120VAC and 24VAC configurations. The 24VAC option is suited to installations near pools or water features and requires a transformer installed away from water. HPC recommends using HPC/SEBCO 100W power supplies.
Electronic Ignition High/Lo
Operates in the same way as the On/Off system but includes a handheld remote, allowing you to switch between high and low flame settings. The low setting reduces flame height by approximately 45 percent.
The remote provides system status via LED indicators. This system can also be controlled using the HPC Bluetooth App, allowing operation from a compatible smartphone or tablet within range.
Available in 120VAC and 24VAC configurations. The 24VAC option is ideal for installations near water and requires a transformer installed at a safe distance. For this, HPC recommends using HPC/SEBCO 100W power supplies.
Product Specifications
- Material: Spun 5052 Aluminum
- Diameter: 35 inches
- Height: 14.5 inches
- Insert: 304 Stainless Steel
- Burner: Penta Burner or Torpedo Penta Burner
BTU Output
- Match Lit with Standard, or Torpedo Burner: 65,000 BTUs
- Electronic Ignition with Standard Burner: 125,000 BTUs
- Electronic Ignition with Torpedo Burner: 140,000 BTUs
Installation Considerations
Ensure the bowl is installed on a level, stable surface and that the integrated ventilation openings at the base remain unobstructed. Gas lines can be routed through the pre-cut access opening for a clean and straightforward installation.
Certification
CSA Certified
Warranty
- Burners: Lifetime Warranty
- Electronics & Gas Valve: Commercial – 1 Year; Residential – 3 Years
- Pilot Assembly: Commercial – 1 Year; Residential – 2 Years
- Stainless Steel Pan & Valve Box: Commercial – 1 Year; Residential – 5 Years