Rectangular Fire Pit Pan with Match Light Kit – SS-AFPPMKIT

Rectangular Fire Pit Pan with Match Light Kit by American Fireglass

American Fireglass Rectangular Fire Pit Kits come fitted with an H-Burner both of which increase in width for every step-up in length.

Match Light, or Match Lit Kits as often referred to, are the simplest form of kit and the drop-in style is the easiest to install and maintain making them ideal for DIY projects.

The pan & burner are supplied with a basic gas connection kit. Lighting the fire pit is incredibly simple. Just turn on the gas via the shut-off valve, and use a taper or long match to light the flame. When you’re done for the evening, turn off the gas, and you’re all set. It’s as easy as that!

Easy to Install

The drop-in pan design ensures a straightforward installation. The base of the pan drops into a cutout in the top of the fire pit structure, with the lip seated on the surface supporting the pan.

These kits are for outdoor vented fire features ONLY. Not for indoor use. The kits are for use with natural gas or propane (small tank/bottle) gas-burning fire features, depending on your selection.

Rectangular Fire Pit Pan with Match Light Kit – Specifications:

Pan & Burner

• Both Pan & Burner are manufactured from high-quality 304 stainless steel and built to withstand extreme heat and harsh weather conditions.
• The pan features a removable cover plate in a designated location, allowing for the easy installation of a spark ignition system at a later date.
• Weep holes in the base of the pan helps prevent the accumulation of water.

Gas Connections

• Natural Gas option – 34″ Quiet-Flex Gas Line with safety shut-off valve and required fittings.
• Propane option – 36″ 3/8″ Rubber Gas Hose, with straight ball valve, 175,000 BTU propane tank regulator, and the fittings include an air mixer.

Dimensions & BTUs

Sizes correspond to the internal dimensions of the pan and do not include the 1.25″ lip. The pan is 2″ deep. 1/2″ Gas Inlet.

• 18″ x 6″  rated 70,000 BTUs  requires cutout  19″ x 7″  with *Fire Glass 20lbs
• 28″ x 8″  rated 120,000 BTUs  requires cutout  29″ x 9″  with *Fire Glass 25lbs
• 30″ x 10″  rated 125,000 BTUs  requires cutout  31″ x 11″  with *Fire Glass 35lbs
• 36″ x 12″  rated 165,000 BTUs  requires cutout  37″ x 13″  with *Fire Glass 50lbs

*Manufacturer’s recommended fire glass quantity

Warranty

Pan & Burner qualifies for the Lifetime Warranty

Rectangular Fire Pit Pan with Match Light Kit – Related Products

• Rectangular Fire Pit Wind Guards
• Rectangular Stainless Steel Fire Pit Lids

Rectangular Fire Pit Pan with Match Light Kit – PDF Link

• Fire Pit Match Lit Installation Information

Prop. 65

 Warning: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/