Racetrack Stainless Steel Fire Pit Bullet Burner by The Outdoor Plus

Racetrack Stainless Steel Fire Pit Bullet Burner

The patented Bullet Burner presents an ideal solution for enhancing the performance of your existing fire pit. With its 1/2″ gas inlet, seamless replacement of your current burner is effortless.

Bullet Burner Technology

The Outdoor Plus Bullet Burner range is manufactured using Flat Flame Technology. The Bullet orifice compresses gas flow & incorporates oxygen to create a cleaner flame.

At the same flame height as a standard burner, your fire pit will consume less gas. Alternatively, you have the option to increase the gas flow for a remarkable and striking flame that surpasses the height achievable by a standard burner.

Manufactured in The Outdoor Plus California installations this is one of the new products added to the renowned Bullet Burner range.

It differs from the original in two ways.

Firstly, the costs are reduced because the gas ring is manufactured from stainless steel rather than all brass, although the all-important patented Bullet Gas Orifice remains Brass.

Secondly, this gas fire pit burner offers a different range of BTU ratings to the original, making it easier to match one to your available gas supply, which, as we all know, is the secret to getting a good flame from any burner.

See our article ‘How to Successfully Build a Gas Fire Pit Part 1‘ if you are not yet aware of the importance of this process.

Racetrack Stainless Steel Fire Pit Bullet Burner  Specifications:

18″ Racetrack has a dimension of 18″ x 6″, a 1/2″ gas inlet, and is rated at 70,000 BTUs

24″ Racetrack has a dimension of 24″ x 6″, a 1/2″ gas inlet, and is rated at 90,000 BTUs

30″ Racetrack has a dimension of 30″ x 6″, a 1/2″ gas inlet, and is rated at 110,000 BTUs

36″ Racetrack has a dimension of 36″ x 6″, a 1/2″ gas inlet, and is rated at 130,000 BTUs

48″ Racetrack has a dimension of 48″ x 6″, a 1/2″ gas inlet, and is rated at 170,000 BTUs

60″ Racetrack has a dimension of 60″ x 6″, a 3/4″ gas inlet, and is rated at 210,000 BTUs

72″ Racetrack has a dimension of  72″ x 6″, a 3/4″ gas inlet, and is rated at 250,000 BTUs

These burners are built to the exact specifications as the original all Brass range of burners in all other respects.

Like all Brass Bullet Burners, these new burners are supplied with a Lifetime Warranty.

Prop 65 Warning

WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.