This round flat spark ignition kit from HPC Fire combines a battery-powered push-button ignition system with a flat stainless steel Pan and Penta Burner. This non-certified model is designed to suit round fire features, supporting a consistent and evenly distributed flame pattern.
This kit is configured for natural gas use and is available in three sizes: 18-inch, 24-inch, and 30-inch diameters.
For the full range of spark ignition systems, explore our Spark Ignition Fire Pit Kits Collection.
Performance & Design
Flat pans are designed to be installed below the top surface of the fire feature, completely hidden under fire media. They need built-in support within the enclosure. This configuration is well-suited to round fire pits where symmetry and consistent flame height are important.
Included Components
- Round flat pan and Penta burner
- Battery-powered push-button spark igniter and switch, AAA battery powered
- Chrome key valve
- Gas fittings and 18-inch flex line, burner to valve
Key Features
- Constructed from 304-grade stainless steel
- Push-button battery spark ignition system
- Natural gas configuration
- 1/2″ gas inlet hub
- Non-certified design
- Supplied unassembled
Product Specification
Each configuration is matched with a proportionate Penta burner to maintain consistent flame performance.
- 18″ pan with 12″ Penta burner, 65,000 BTUs
- 24″ pan with 18″ Penta burner, 125,000 BTUs
- 30″ pan with 24″ Penta burner, 200,000 BTUs
Note: The actual pan diameter is approximately 0.25 inches smaller than the listed size. Refer to the specification drawings for exact dimensions.
Installation & Use
This kit is designed for use in outdoor, vented natural gas fire features only.
We strongly recommend that all gas installations be carried out by qualified professionals and comply with local and state codes.
Non-Certified Design
This kit is a non-certified fire pit system and is offered in a more limited range of sizes, while certified fire pit kit configurations are available in a wider range of options. In some cases, these configurations may also allow for higher BTU output.
For a more detailed explanation of the differences between certified and non-certified fire pit systems, see our linked article.
Operation
Fire Pit Start-Up:
- Press the push-button igniter to initiate a spark
- Slowly open the manual valve by turning counterclockwise
- Release the igniter once the flame is established
- Adjust the valve to achieve the desired flame height
Fire Pit Shutdown:
- Close the manual valve by turning clockwise
- Ensure the flame is fully extinguished
- Remove the key and store it safely away from children
- Turn off the fuel supply when not in use
Warranty
The burner is covered by a lifetime warranty.