This 60-inch round HPC Round Ready-to-Finish Fire Pit from the Gas Tank Series delivers a fully assembled structural shell that serves as a blank canvas, allowing you to tailor the exterior appearance to your surrounding landscape using tile, paint, or stone cladding. By supplying the complete housing, factory-installed HardieBoard substrate, ventilation, and certified gas equipment, this DIY unit removes construction guesswork so you can move straight to applying the final finish.
Standing at an elevated 23.5-inch height to accommodate a standard 20-lb liquid propane cylinder inside, this structure eliminates the need for external gas plumbing or a separate tank hideaway. Access to the internal tank area is handled through an integrated stainless steel hatch panel built directly into the shell.
The commercial-grade core utilizes a .065 mild steel welded frame wrapped in a 1/2-inch Hardie Board shell, featuring pre-installed vents. Each kit comes supplied with a fully assembled, CSA-certified HPC round insert, offering multiple burner styles and ignition options tailored to your gas supply.
Custom shapes and tailored dimensions are also available upon request. Browse other shapes and sizes within our Ready to Finish Enclosure Selection.
Options
Select Burner Type
- Standard Penta Burner: A traditional burner that is designed to create a natural, campfire-style flame pattern. Rather than forming a simple ring, the Penta design distributes the flame across multiple points, resulting in an organic flame presentation.
- Torpedo Penta Burner: An upgraded version fitted with precision-engineered nozzles. This produces a taller, more defined flame while maintaining efficient gas usage. This option is often selected where a stronger visual flame is desired.
Select Ignition
HPC keeps ignition options focused and practical, with two systems to suit different installation requirements.
Match Lit – CSA Certified
A simple, manual system operated using a key valve. The burner is lit with a long match or lighter, with flame adjustment controlled at the valve.
Push Button Ignition – CSA Certified
Battery-powered ignition using a spark probe and control panel. Includes flame-sensing technology that automatically shuts off the gas supply if the flame is extinguished.
A practical option where added safety is required, but mains power is not available. The flame height can be adjusted using the knob on the control panel.
What’s Included
- .065 mild steel welded frame
- 1/2″ Hardie Board shell, pre-cut for vents and insert
- Stainless steel round insert (matched to enclosure size)
- Penta burner (standard or torpedo)
- Selected ignition system
- Stainless steel ventilation components
- Stainless Steel Access Panel
All core components are shipped assembled and ready for installation. The fire pit insert, burner, and ignition system are also pre-assembled but shipped separately to prevent damage in transit and to simplify handling during installation.
Access Panel for Hidden Gas Tank
Dimensions: 13.5″ x 17.5″
Installation Considerations
- Adequate drainage must be provided within the enclosure to prevent water build-up
- Ventilation openings must not be obstructed
Cladding Requirements
The exterior surface arrives ready for custom finishing using your choice of natural stone, tile, stucco, or other non-combustible cladding to seamlessly match your landscape. These finishing materials are not included.
The figure below serve as a general guide. Actual coverage requirements will vary based on your selected material, tile or stone thickness, pattern joint spacing, and installation waste.
- 60″ Model: ~50 sq ft
Specifications
- Diameters: 60″
- Height: 23.5″
- Fuel Type: 20lb Tank Liquid Propane (not included)
- Ignition Options: Match Lit, Push Button Flame Sensing
- Burner: 18″ Diameter Penta (Standard or Torpedo)
- Insert Type: 25″ Diameter Round Stainless Steel Insert
- Approximate weight: 150 lbs
Burner Performance
Burner output varies depending on the ignition system selected:
- Match Lit: 65,000 BTUs
- Push Button Flame Sensing: 90,000 BTUs
Warranty
Warranty coverage includes:
- Stainless steel burners: Lifetime
- Stainless steel components: up to 5 years (residential)
- Valves and electronic components: 1 to 3 years, depending on use
- Enclosure structure: 3 years
(Commercial applications may carry reduced coverage periods.)