High Capacity Fire Pit Electronic Ignition System
These fire pit electronic ignition systems are CSA-certified and designed for outdoor fire features. The units are incredibly robust, with safety being a top priority for The Outdoor Plus.
What is Fire Pit Electronic Ignition?
Electronic Ignition provides the highest level of safety available for a gas fire pit along with options to light your burner either via an ON/Off switch, Electric Timers, Emergency Stop Buttons, a swimming pool system, remote control, or a home automated system to provide effortless control of your fire pit.
An Electronic Ignition system is the most sophisticated way to light your fire pit.
The unit monitors the presence of a flame using a thermocouple. If the flame is extinguished, it will make several attempts to relight it. Only if that fails will the system shut off the gas supply.
Options when purchasing:
Low Voltage – DC -(TOP-500EIS-300-30DC)
- To be used for installations within five feet or less of water features, such as swimming pools, fountains, etc.
- Includes Electronic Valve, Pilot Igniter, and a separate Transformer which can power 2 fire features.
Plug and Play – DC – (TOP-500EIS-300-30DC-110V)
- Includes Electronic Valve with a 3-prong plug and a Pilot Igniter.
- With the Plug & Play System, the three-prong plug speeds up installation and only requires a weather-protected GFCI socket within the fire feature structure, and an ON/OFF Switch installed somewhere convenient on the electricity feed to the socket. However, you could also splice the plug and hardwire the unit to a pool controller, smart home, wireless light switch, remote control unit, etc.
Features
Electronics
Features a moisture-protected control module, reliable Hot Surface Ignition (HSI), a durable thermocouple flame sensor, LED diagnostics for easy troubleshooting, and a transformer (to GFCI Outlet for safety).
Gas Valve and Pilot Components
Includes water-resistant connectors, moisture-protected coils, a durable nickel-plated thermocouple, key components like the pilot injectors, and HSI designed for durability.
Electronic Ignition Systems or High Capacity Specs:
- Maximum Gas Output: 510,000 BTU/hr
- Inlet / Outlet Size: ¾” FIP
- Electrical Rating: 30V DC
- -20° to 175° Temp Range
- Unit temperature safety shutoff: 175°F
- LED diagnostics for field service and troubleshooting
These high-capacity units are also available for standard-capacity burners (maximum BTU rating of 290,000). See our Standard-Capacity Listing for details.
Also available are the Mini-Capacity units for burners with a BTU rating of 190,000 and lower. See our Mini-Capacity Listing for details.
Further Information
- Compatible with both Natural Gas and Liquid Propane (Portable LP Tank or Hard Line LP )
- Can be installed in small spaces such as fire bowls.
- Proper Venting – All gas fire pit enclosures require a minimum of 18 square inches on two opposing sides. Fire pits with higher BTUs or extended operating hours may require additional ventilation.
- Fire Media smaller than 1/2″ is not recommended for LP applications.
- An Air Mixer for Propane Is recommended for Propane Burners.
- A listed manual gas shutoff device must be installed on the gas feed to the appliance’s location.
- A heat shield/plate or pan MUST be installed between the unit and the burner ring to avoid overheating.
- Only a qualified installer, service agent, or local gas supplier may install and service this product.
Warranty
Electronics, Gas Valves, Pilot Assembly: Commercial – 6 Months; Residential – 12 Months
Certification
Components are CSA Certified ANSI Z21.97-(2017) / CSA 2.41-(2017)
Download Manual
Video
Low Voltage Fire Pit Ignition System Installation
| 5 star | 0% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Sorry, no reviews match your current selections