...

Smart Weather Electronic Ignition Systems 110V or 12V High Capacity TOP-500EIS-300

The Outdoor Plus
Part #: TOP-500EIS-300-xxx-H

$2,516.00$2,528.00

Free Shipping Small Logo
Within 48 Contiguious States

Smart Weather Electronic Ignition Systems 110V or 12V High Capacity

These Smart Weather Electronic Ignition Systems (SWEIS) utilize CSA-certified components and are designed for outdoor fire features.

What is Fire Pit Electronic Ignition?

Electronic Ignition provides the highest level of safety available for a gas fire pit along with options to light your burner either via an ON/Off switch, Electric Timers, Emergency Stop Buttons, a swimming pool system, remote control, an App, or a home automated system to provide effortless control of your fire pit.

An Electronic Ignition system is the most sophisticated way to light your fire pit.

The SWEIS monitors the presence of a flame using a thermocouple and should the flame be extinguished will make several attempts to relight the flame. Only if that fails will the system shut off the gas supply.

SWEIS units are not only incredibly robust but safety is also a top priority for The Outdoor Plus. The units are tested in both mild rain and snow and can withstand winds up to 55mph. The unit will shut off automatically in unsafe, severe rain & wind conditions.

Smart Weather Electronic Ignition Systems 110V or 12V High Capacity
Components of the 110V and 12V SWEIS System.

Options when purchasing:

12 Volt – Low Voltage (TOP-500EIS-300-12)

  • To be used for installations within five feet or less of water features, such as swimming pools, fountains, etc.
  • Includes Electronic Valve, Pilot Igniter, 12V Transformer

110 Volt – Plug and Play (TOP-500EIS-300-110)

  • Includes Electronic Valve with a 3-prong plug and a Pilot Igniter.
  • With the 110V Plug & Play System, the three-prong plug speeds up installation and only requires a weather-protected GFCI socket with a light switch.

SWEIS Features:

Electronics

  • Potted control module to protect against moisture and damage.
  • Hot Surface Ignition (HSI), provides stable burner ignition in harsh conditions.
  • Thermocouple Flame Sense is fast responding and resistant to wind, moisture, and corrosion.
  • LED diagnostics for field service and troubleshooting.

Gas Valve and Pilot Components

  • Water-resistant connectors.
  • The coils are encapsulated to protect against moisture.
  • The Pilot injectors are stainless steel.
  • Has a wind-resistant robust flame pattern.
  • The Thermocouple is nickel-plated for durability.
  • The Hot Surface Igniter (HSI) connection is waterproof and the HSI itself has a protective cage.
  • The Power Wire connector is waterproof.

Smart Weather Electronic Ignition Systems 110V or 12V High Capacity Specs:

  • Maximum Gas Output: 510,000 BTU/hr
  • Inlet Gas Pressure Limit: ½ PSI
  • Inlet / Outlet Size: 3/4” FIP
  • Electrical Rating: 110 VAC
  • Electrical Rating: 12 VAC
  • Hot Surface Igniter (HSI)
  • Thermocouple Flame Sensor
  • LED Diagnostics
  • -20° – 175° Temp Range
  • 12V –   L: 6″ W: 5″ H: 5″
  • 110V – L: 6″ W: 7.25″ H: 3.75″

SWEIS units are also available for standard-capacity burners which have a maximum BTU rating of 290,000. See our Standard-Capacity Listing for details.

SWEIS units are also available for Mini-Capacity burners with a BTU rating of 175,000 and lower. See our Mini-Capacity Listing for details.

Further Information

  • Compatible with both Natural Gas and Liquid Propane (Portable LP Tank or Hard Line LP )
  • The small construction allows it to be installed in tight spaces such as fire bowls.
  • Proper Venting – Certain fire pit enclosures may require extra ventilation depending on size, material, or extended use. 1 Square Inch of ventilation is REQUIRED for every 10,000 BTUs. This is especially important for propane units, as propane gas is heavier than air and can pool in the bottom of an enclosure.
  • Fire Media smaller than 1/2″ is not recommended for liquid propane applications.  You can use 1/2″ to 3/4″ Fire glass specifically designed and approved for fire features as well as stones of man-made materials (refractory) designed for fire pits. DO NOT USE SAND, AND DO NOT FILL HOLLOW AREAS.
  • An Air Mixer for Propane Is Recommended for Propane Burners.
  • A listed manual gas shutoff device must be installed prior to the location of the appliance.
  • The pilot is configured for natural gas. A propane gas injector is provided in the kit.
  • A heat shield/plate or burner pan MUST be installed between the SWEIS and the burner ring to avoid overheating.
  • Only a qualified installer, service agent or local gas supplier may install and service this product.

Warranty:

Stainless Steel or Brass Burner Rings: Lifetime Warranty

Stainless Steel Pan, Electronics, Gas Valves, Pilot Assembly: Commercial – 6 Months; Residential – 12 Months

Certification

Components are CSA Certified ANSI Z21.97-(2017) / CSA 2.41-(2017) certified

Download Manual:

110V Plug & Play SWEIS – Electronic-Ignition-Manual

Low Voltage SWEIS – 12V-Electronic-Ignition-Manual

Prop 65 Warning

This product can expose you to chemicals including Chromium, Lead, and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Chromium, Lead, and Lead Compounds which are known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.