...
Free Shipping

Round Flat Insert Flame Sensing Spark Ignition / HPC Fire

HPC Fire
Part #: FPPKxx-FLEX-xx

$1,222.14$2,133.82

Free Shipping Small Logo
Within 48 Contiguious States

Round Flat Insert Flame Sensing Spark Ignition / HPC Fire

Available in 14, 18, 24, 30, and 36-inch diameter inserts, and in either Natural Gas or Propane versions.

Round Flat Insert Flame Sensing Spark Ignition / HPC Fire

Please note that for Propane installations there are two options:

  1. Select ‘Propane – Small Tank’ option if using a 20 lb bottle of propane gas
  2. Select ‘Propane’ if connecting to a ‘whole-house’ propane gas supply

Here at the Magic Of Fire, this particular system is our all-time favorite. We believe it offers just the right balance of features, quality, safety, and price point.

HPC understands that not all outdoor areas will have power supplied for the ease and safety of electronic ignition use, but flame sensing in your area may be required by code or you just prefer that peace of mind.

This certified range combines the convenience of a push button fire pit kit with the fire pit flame-sensing safety system. Lighting the fire is as simple as pushing a button. Flame height is fully adjustable via the control knob. If the flame blows out the system safely turns off the gas.

Flame sense fire pit ignition panel

 

 

These units are CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.

Supplied fully assembled, the system is easy to install.

How It Works

Start-Up: This is done by simultaneously pressing the valve control knob to start the flow of pilot gas and pressing the ignition button for the spark. Release the spark after pilot ignition, and release the valve control knob after ~20 seconds. Then turn the valve control knob counterclockwise to the light main burner.

Operation: Flame height may be adjusted by turning the valve control knob- counterclockwise provides more flame, and clockwise lowers flame. If flame loss does occur, the system will automatically turn off all gas flow.

Shut Down: To turn OFF the fire pit simply turn the valve control knob clockwise- slightly depress the knob to reach the OFF position.

Round Flat Insert Flame Sensing Spark Ignition / HPC Fire Features:

  • Fully Assembled and ready to install.
  • Control components are protected within the valve box.
  • Flex Line configuration provides versatile and simple installation.
  • Start ignition with the push button and valve control knob.
  • Flame sensing- the system will turn off gas if the flame is lost.
  • Flame height is adjustable using a valve control knob.
  • Battery Operated System- this is the perfect solution for installs with no power.
  • Natural Gas or Liquid Propane: Factory-built & tested for either fuel.
  • CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.

 

Round Flat Insert Flame Sensing Spark Ignition / HPC Fire Details:

Round Flat Flame Sensing Specifications

 

Important Please Note:

The table above refers to Structure Size ‘C’. As per the diagram below, this is the overall size of the structure that the unit is to be fitted into. These are the manufacturers’ recommendations.

rnd-drop-in-ei.jpg

Required Gas Pressure:

Gas pressure and type should be checked prior to installation and use.

Natural Gas Fire Pit:
Supply Pressure: Minimum: 3.5 inches W.C.;
Maximum: 7.0 inches W.C.

LP Gas:
Supply Pressure: Minimum: 8.0 inches W.C.;
Maximum: 11.0 inches W.C.

 

Round Flat Insert Flame Sensing Spark Ignition / HPC Fire Download Manuals:

pdf-icon-copy.jpgInstallation Instructions – Download here

 

pdf-icon-copy.jpgFire Pit Insert Drawings – Download here

 

pdf-icon-copy.jpgValve Box Dimensions – FPPK Valve Box

 

pdf-icon-copy.jpgCSA Certification – Download here

 

 

Prop 65WARNING: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/