Remi Hammered Copper Fire Bowl 31 Inch
- Size – 31 Inches diameter
- Height – 11.5 inches
- Base – 13 inches diameter
- Burner -10 inches diameter
- BTU rating – 45,000
- Suggested Fire Glass – 75 lbs
- Burner and Pan – 304 Stainless Steel
- Pan depth – 2 inches
- Match Lit and 12 volt Electronic Ignition
- Natural Gas and Propane Versions
- Lifetime Warranty on Burner
- Hammered Copper finish
Includes: Bowl, Fire Plate, Burner, Gas Line, LP or NG Orifice, Mounting Bracket & Lava Rock and selected Ignition System
*Due to copper’s natural properties and surrounding environment the copper material will change its color into a blue/green hue over time when exposed to the various natural elements.
All The Outdoor Plus Fire Pits are made to order.
Remi Hammered Copper Fire Bowl 31 Inch is available with two ignition options, Match Lit and a 12 Volt Electronic Ignition System.
Simple, straightforward forward, and low maintenance are the advantages of a Match Lit system. They are also the most budget-friendly systems.
To light, turn on the gas at the shutoff valve on the fire pit, and offer up a flame over the fire glass or lava rock.
You can adjust the flame via the shutoff valve, and to turn off the fire pit, turn the shutoff valve to the off position.
Electronic Ignition System
The Electronic system has a flame sensing function. This monitors the flame and detects if it goes out. Should that occur then the system will make several attempts tp re-light the flame, and if not successful it will automatically turn off the gas supply.
Shutting off the gas supply helps to prevent the build up of a potentially dangerous gas cloud.
Remi Hammered Copper Fire Bowl 31 Inch Drawing:
The tradition of hammering copper is a metalworking technique used for generations to strengthen the surface area of copper sheets.
Typically, a ball peen hammer is used to form the indentations in hammered copper before the sheet is manipulated into its finished form.
Important Installation Instructions
It is highly recommended that a key valve ( not supplied ) is installed on the gas line in close proximity to the fire bowl. This could be on the pedestal, wall, etc on which the bowl is situated or on the bowl itself.
The manufacturer offers the option of a factory installation of a key valve on fire bowl if required. Please order via the Related Products section below.
Remi Hammered Copper Fire Bowl 31 Inch Manuals: