844 631 7638

Phone call free icon 2 (1)

FREE SHIPPING ON EVERY ORDER

Remi 31 Inch Fire and Water Bowl Hammered Copper

This item is Made to Order.                              

List Price: $3,391.00
You save: $309.00
Our Price: $3,082.00 + FREE SHIPPING
Clear

Remi 31 Inch Fire and Water Bowl Hammered Copper

  • Size - 31 Inches diameter

  • Height - 11.5 inches

  • Base - 13 inches diameter

  • Burner -10 inches diameter

  • BTU rating - 45,000

  • Suggested Fire Glass - 75 lbs

  • Made in the USA

  • Stainless Steel Burner + Pan

  • Pan depth - 2 inches

  • Match Lit or Electronic Ignition

  • Nat. Gas or Propane

  • Water Feed - 15 GPM

  • Hammered Copper finish

  • Lifetime Warranty on Burner

Includes: Bowl, Fire Plate, Burner, Gas Line, LP or NG Orifice, Mounting Bracket & Lava Rock and selected Ignition System

Please Note:

*Due to copper’s natural properties and surrounding environment the copper material will change its color into a blue/green hue over time when exposed to the various natural elements.

All The Outdoor Plus Fire Pits are made to order.

Ignition Options

Remi 31 Inch Fire and Water Bowl Hammered Copper is available with two ignition options, Match Lit and a 12 Volt Electronic Ignition System.

Match Lit

Simple, straightforward forward, and low maintenance are the advantages of a Match Lit system. They are also the most budget-friendly systems, which reflects on the overall price of your fire pit.

To light, turn on the gas at the shutoff valve on the fire pit, and offer up a flame over the fire glass or lava rock.

You can adjust the flame via the shutoff valve.

To turn off the fire pit, turn the shutoff valve to the off position.

Electronic Ignition Systems

These Fire Bowls are fitted with a 12 Volt CSA Certified Electronic Ignition System, referred to a the Smart Weather Electronic Ignition System ( SWEIS )

The SWEIS units have been tested in rain, snow and 50+ mph winds. The Flame Sensing function monitors the flame and should it extinguish the system will make several attempts to relight it.

If the attempts at relighting fail, the system will automatically shut off the gas supply, preventing the build up of a potentially dangerous gas cloud.

This compact ignition system can be set up for control via a swimming pool system, remote control, App, or a home automated system to provide effortless control of your fire pit.

Read more about Ignition Systems

 

Remi 31 Inch Fire and Water Bowl Hammered Copper Drawing:

Remi 31 Inch Fire and Water Bowl Hammered Copper Dimensions:
Remi 31 Inch Fire and Water Bowl Hammered Copper Dimensions:

Hammered Copper

The tradition of hammering copper is a metalworking technique used for generations to strengthen the surface area of copper sheets.

Typically, a ball peen hammer is used to form the indentations in hammered copper before the sheet is manipulated into its finished form.

Hammered Copper Finish When New
Hammered Copper Finish When New

 

Important Installation Instructions

It is highly recommended that a key valve ( not supplied ) is installed on the gas line in close proximity to the fire bowl. This could be on the pedestal, wall, etc on which the bowl is situated or on the bowl itself.

Remi 31 Inch Fire and Water Bowl Hammered Copper Manuals:

2020-Electronic-Fire-and-Water-Bowl-Manual

2020-Match-Lit-Fire-and-Water-Bowl-Manual

Product-Care-Instructions-The-Outdoor-Plus

General-Fire-Pit-Manual-2019

 

Purchasing Terms – Remi 31 Inch Fire and Water Bowl Hammered Copper

The vast majority of The Outdoor Plus products including, but not limited to fire pits, pans and burners, are made to order, and therefore are subject to slightly different Terms of Purchase:

  1. Orders may be cancelled at no cost within 7 days of receipt of the order.
  2. Beyond 7 days from the receipt of order, orders may be cancelled. A cancellation fee of 25% may be charged at the discretion of the manufacturer.
  3. Returns are acceptable for the following reasons:

If the product is damaged in transit ( please inform us within 48 hrs with photos of the damage ), please refuse delivery if damage is obvious on the exterior  ( photos please )

If the incorrect product is supplied

If the product is faulty ( The Outdoor Plus reserve the right to attempt to fix the issue )

 

 

Brand

The Outdoor Plus

The Outdoor Plus ( T.O.P. ) company is rightly proud of its Made in America badge. They manufacture, by hand, all their fire pits, fire bowls, fire and water features, and burners at their 70,000 square foot facility in Ontario, California. With 75 years of experience, it is no surprise that they are among the most innovative companies in our industry. Not only with their designs, but also with the materials that they utilize. The Outdoor Plus was one of the first companies to use Glass fiber Reinforced Concrete ( GFRC ) and Corten Steel to manufacture fire pits. They are renowned for their fire and water features too. Fire and Water Bowl Across all their fire pit ranges, there is a wide variety of colors, textures, and finishes available. You would be hard-pressed not to find just what you need. If the more traditional look is what you need, the range of copper fire pits and fire bowls is stunning. However, The Outdoor Plus company is probably best known for its patented Bullet Burners.
The Outdoor Plus Bullet Burner
The Outdoor Plus Bullet Burner
These remarkable Fire Pit Burners produce a much taller flame than conventional burners and amazingly use less gas doing so! Download The Outdoor Plus catalog and take your time browsing the products and getting inspired for your project.
T.O.P.s logo
Select Gas Type

Liquid Propane, Natural Gas

Select Ignition

12 Volt Electronic Ignition, Match Lit

Scroll to Top