Rectangular S Fire Burner Insert Flame Sensing Kit / HPC Fire

Rectangular S Fire Burner Insert Flame Sensing Kit / HPC Fire

 

Available in 5 sizes, see table below and in either Natural Gas or Propane versions.

Please note that for Propane installations there are two options:

1. Select the ‘Propane-Small Tank’ option if using a 20 lb bottle of propane gas
2. Select ‘Propane’ if connecting to a ‘whole house’ propane gas supply.

Here at the Magic Of Fire this particular system is our all-time favorite. We believe it offers just the right balance of features, quality, safety, and price point.

HPC understands that not all outdoor areas will have power supplied for the ease and safety of electronic ignition use, but flame sensing in your area may be required by code or you just prefer that peace of mind.

This certified Push Button / Flame Sensing range allows both the convenience of push-button ignition with the safety of flame sensing. Lighting the fire is as simple as pushing a button. Flame height is fully adjustable via a control knob. If the flame blows out the system safely turns off gas.

These units are CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.

Supplied fully assembled, the system is easy to install.

How It Works

Start-Up: This is done by simultaneously pressing the valve control knob to start the flow of pilot gas and pressing the ignition button for the spark. Release the spark after pilot ignition, and release the valve control knob after ~20 seconds. Then turn the valve control knob counterclockwise to light the main burner.

Operation: Flame height may be adjusted by turning the valve control knob- counterclockwise provides more flame, and clockwise lowers flame. If flame loss does occur, the system will automatically turn off all gas flow.

Shut Down: To turn OFF the fire pit simply turn the valve control knob clockwise- slightly depress the knob to reach the OFF position.

 

Rectangular S Fire Burner Insert Flame Sensing Kit / HPC Fire Features:

• Fully Assembled and ready to install.
• Control components are protected within the valve box.
• Flex Line configuration provides versatile and simple installation.
• Start ignition with the push button and valve control knob.
• The flame-sensing system will turn off the gas if the flame is lost.
• Flame height is adjustable using the valve control knob.
• Battery Operated System- is the perfect solution for installs with no power.
• Natural Gas or Liquid Propane: Factory built & tested for either fuel.
• CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.

 

Rectangular S Fire Burner Insert Flame Sensing Kit / HPC Fire Specifications:

 

 

Required Gas Pressure:

Gas pressure and type should be checked prior to installation and use.

Natural Gas Fire Pit:
Supply Pressure: Minimum: 3.5 inches W.C.;
Maximum: 7.0 inches W.C.

LP Gas:
Supply Pressure: Minimum: 8.0 inches W.C.;
Maximum: 11.0 inches W.C.

Rectangular S Fire Burner Insert Flame Sensing Kit / HPC Fire Downloads:

Installation Instructions – Download here

 

Insert Dimensions – Download here

 

Valve Box Dimensions – FPPK Valve Box

 

CSA Certification – Download here

 

 

WARNING: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/