Ready to Finish Round Fire Pit Enclosures

HPC  Ready to Finish Round Enclosure with Certified Fire Pit Insert

From $3,924.50

SKU UxR/25SSCEK-x/120VAC Category

Ready to Finish Round Fire Pit Enclosures Complete with Certified Fire Pit Insert and Electronic Ignition

Available in 45 and 54 Inches Diameter and in either Propane or Natural Gas.


The Enclosure


HPC Round Fire Pit Enclosure


These units are unfinished to allow you to finish with the stone, veneer, or stucco of your choice. The round housings take the guess work out of enclosure construction and are regularly used by professional Landscape Contractors, etc. The time saving element of these units to professional contractors is huge, and you are guaranteed to get a great looking fire pit. These are 18” tall and are constructed of sturdy 22 gauge galvanized steel material, welded frame, and a 1/2” hardiboard shell, and weigh approx. 150 lbs.

The model featured here is available in two diameters 45 inches and 54 inches. They are both supplied with a completely assembled 25″ diameter certified fire pit burner with electronic ignition rated at 125,000 BTU’s

 The Fire Pit Insert

This is the top-of-the-line gas fire pit system from HPC featuring the ignition ease with use of a wall switch as well as auto-relight if flame is lost. It is the most advanced control system with numerous convenience and performance improvements including a redesigned hot surface igniter.


HPC Round Insert Certified


The 25 inch diameter tray is supplied complete with the a 18″ Penta Burner. These inserts have a 1.3 inch lip designed to support the insert once it is  installed into the pre-formed opening in the enclosure.

 Supplied fully assembled and ready to install, the control components are protected within stainless steel valve box. Lighting your fire pit is via wall switch, located either indoors or out. The system also features an auto re-light if the flame is extinguished. Ignition is complete using a robust and reliable Hot Surface igniter, and also features an internal temperature monitoring system with overheat auto shutoff.

HPC Ignition Probe


The unit is powered by a 120 vac standard outdoor grounded power cord- simply plug into GFCI outlet.

 CSA Cerification

As one of the most advanced flame monitoring systems available on the market today, it has been CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. (This new EI system already meets upcoming 2018 ANSI requirements)! These certification should meet with all codes that may be required in the US and Canada.

Weight 5.2800005820204365 lbs
Dimensions 0.0000 × 0.0000 × 0.0000 in
Item Condition


Item Remarks