HPC Rectangular Insert H-Burner Match Lit Kit CSA Certified

HPC Fire
Part #: MLFPKx-H-FLEX-x config


Free Shipping Small Logo
Within 48 Contiguious States
Product Description
Product Reviews

HPC Rectangular Insert H-Burner Match Lit Kit CSA Certified

CSA Certification and Lifetime Warranty Badge

Match Lit Kits ( MLFPK Series)

These Match Lit kits are HPCs’ most straightforward CSA-Certified Fire Pit Kits – easy to install and operate, and require a minimal amount of maintenance.

HPC is currently phasing out the standard H-Burner which forms part of this kit. It is in effect being replaced with the Torpedo H-Burner. So if the size you are looking for is no longer available please check out the Torpedo version listing –  HPC Rectangular Insert, Torpedo H-Burner, Match Lit Kit.


Operating Instructions:

  1. Lighting: Hold a long stem taper or lighter over the edge of the burner, then slowly open the key valve ( the key is locked in the valve when the gas is open and can only be removed when in the off position ).
  2. Flame Adjustment: The flame height can be easily adjusted by turning the key, anti-clockwise increases the flame and clockwise will reduce the flame.
  3. Turning Off: To shut down the fire pit, turn the key clockwise to the Off position, and remove the key. With the key removed, the gas can not be turned on.

Why Choose HPC Match Lit Kits?

  • They are fully assembled at the factory and arrive ready to install with easy-to-follow instructions
  • The flex line between the pan and the key valve creates a very versatile and straightforward installation process.
  • The kit includes a valve mounting bracket to ensure that the valve is securely and safely fixed in position
  • The Key Valve can be safely used to adjust the flame height
  • These kits are built and tested for use with Natural Gas or Propane.
  • Propane options for either small tank usage or large bulk tanks – be sure to select the correct option
  • No Hassle HPC Lifetime Warranty on the burner
  • CSA Certified to ANSI Z21.97-2017 / CSA 2.41-2014 for both USA and Canadian Standards.

Manufacturing Specifications:

  1. Manufactured from 304 Grade, 18 gauge Stainless Steel
  2. The burner has a raised hub design to prevent water ingress
  3. The Insert has Weep holes for drainage
  4. Includes bolted gas fitting for extra strength
  5. Lifetime Warranty on burners

The 24″ x 12″ pan (excluding Lip) has an 18″ x 6″ standard H-Burner with 65,000 BTUs

The 30″ x 12″ pan (excluding Lip) has a 24″ x 6″ standard H-Burner with 65,000 BTUs

The 36″ x 14″ pan (excluding Lip) has a 30″ x 8″ standard H-Burner with 65,000 BTUs


Need More BTUs?

This range of Match Lit Kits from HPC is also available as a non-certified product, which produces a higher BTU rating for the respective size options.


Customer Reviews

Be the first to write a review