HPC Linear Trough – Match Lit Fire Pit Kit

HPC Linear Trough – Match Lit Fire Pit Kit

This match-lit, linear fire pit kit is one of HPCs’ most straightforward CSA Certified Fire Pit Kits – easy to install and operate and requires a minimal amount of maintenance.

HPC is currently phasing out its standard burner. All kits will eventually be fitted with the new Torpedo H-Burner. 

If the size you are looking for is no longer available please check out the HPC Linear Trough – Torpedo – Match Light Fire Pit Kit. Torpedo Burners create the biggest, warmest flame on the market.

Operating Instructions:

1. Lighting: Hold a long stem taper or lighter over the edge of the burner, then slowly open the key valve ( the key is locked in the valve when the gas is open and can only be removed when in the off position ).
2. Flame Adjustment: The flame height can be easily adjusted by turning the key, anti-clockwise increases the flame, and clockwise will reduce the flame.
3. Turning Off: To shut down the fire pit, turn the key clockwise to the Off position, and remove the key. With the key removed, the gas can not be turned on.

Why Choose HPC Match Lit Kits?

• They are fully assembled at the factory and arrive ready to install with easy-to-follow instructions
• The flex line between the pan and the key valve creates a very versatile and straightforward installation process.
• The kit includes a valve mounting bracket to ensure that the valve is securely and safely fixed in position
• The Key Valve can be safely used to adjust the flame height
• These kits are built and tested for use with Natural Gas or Propane.
• Propane options for either small tank usage or large bulk tanks – be sure to select the correct option
• No Hassle HPC Lifetime Warranty on the burner
• CSA Certified to ANSI Z21.97-2017 / CSA 2.41-2014 for both USA and Canadian Standards.

Manufacturing Specifications – HPC Linear Trough – Match Lit Fire Pit Kit:

1. Manufactured from 304 Grade, 18 gauge Stainless Steel
2. The burner has a raised hub design to prevent water ingress
3. The Insert has Weep holes for drainage
4. Includes bolted gas fitting for extra strength
5. Lifetime Warranty on burners

The 24.5″ x 7.9″ pan (excluding 1.3″ Lip) has a 24″ standard T-Burner with 55,000 BTUs

The 36.5″ x 7.9″ pan (excluding 1.3″ Lip) has a 36″ standard T-Burner with 65,000 BTUs

The 48.5″ x 7.9″ pan (excluding 1.3″ Lip) has a 48″ standard T-Burner with 65,000 BTUs

HPC Linear Trough – Match Lit Fire Pit Kit Downloads:

Drawing-MLFPK-Trough

MLFPK-Insert-Manual

Need More BTUs?

This range of Match Lit Kits from HPC is also available as a non-certified product, which produces a higher BTU rating for the respective size options.

WARNING: This product can expose you to chemicals including Lead and Chromium, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.