Fire Pit Glass Wind Guard Linear
American Fireglass Linear Wind Guard
HPC Linear Wind Guard
Firegear Linear Wind Guard
35.5 x 11.5 x 6 inches
41.5 x 11.5 x 6 inches
53.5 x 11.5 x 6 inches
65.5 x 11.5 x 6 inches
77.5 x 11.5 x 6 inches
31 x 15 x 6 inches
43 x 15 x 6 inches
55 x 15 x 6 inches
67 x 15 x 6 inches
38 x 10 x 7.5 inches
44 x 10 x 7.5 inches
60 x 10 x 7.5 inches
A Fire Pit Glass Wind Guard Linear configuration is designed to be compatible with a long narrow fire pit tray.
American Fireglass, HPC Fire, and Firegear all have a range of Linear fire pit trays. American Fireglass and Firegears Linear trays are both 6 inches wide, while HPC Fires’ Linear trays range is 8 inches wide.
What Size Wind Guard Do I Need?
If you select a wind guard from the same brand as your fire pit tray, the product listing should tell which tray size any particular wind guard is designed to fit.
For example, 17.5 x 17.5 inch American Fireglass square wind guards fit a 12 x 12-inch square American Fireglass fire pit tray.
However, you don’t need to be loyal to a brand as long as you follow these two rules:
- The wind guard should never sit in the burner tray; it must straddle over the tray and sit on the fire pit structure’s upper surface.
- A wind guard should have a minimum of 2.5 inches clearance from the fire fit tray’s edge to the wind guard on all sides.
Measure your fire pit trays length and width, or diameter, add 5 inches to each dimension, and that is the minimum size of wind guard you need.
It is OK to go a little larger if required, but not smaller.
Wind Guards allow you to use your fire pit more often. It may not be comfortable or safe to be near the fire pit on breezy evenings without one.
The wind guard keeps the flame centralized and steady, and they look great too.